Recent Posts

Pages: 1 2 [3]
21
TMC3in1 FAQ / Re: What do I need to run the TMC3in1?
« Last post by RandyRay on July 14, 2017, 10:33:56 AM »
You will need at least the following:
•   Mach3 (Mach4 support is in development)
•   TMC3in1
•   An Ethernet SmoothStepper (ESS)
•   A plasma unit
•   We also recommend a touch off

Mach3 is the current developed platform as most of our customers are still using Mach3 at the present. Mach4 is under development and will soon be available.
A TMC3in1 is available from us or one of our distributors.
An ESS (Ethernet Smooth Stepper) is a high performance external motion controller. It is a requirement for use with the TMC3in1 and is available from us, Warp9td, or one of their many distributors.
A plasma unit is required (of course)
We also recommend a torch "touch-off" whether mechanical or electronic. These are available from many distributors. The touch-off makes plasma cutting much easier and cleaner.

Randy
22
TMC3in1 FAQ / What do I need to run the TMC3in1?
« Last post by Beginner on July 14, 2017, 10:27:17 AM »
What are all the hardware and software components I need to run the TMC3in1 under Mach3/4?
23
TMC3in1 FAQ / Re: Soemthing isn't working, HELP!
« Last post by RandyRay on July 14, 2017, 10:25:04 AM »
Read the Troubleshooting Basics section of the "Vol 4 FAQ and Troubleshooting Guide" document first.  It walks you through all of the important first steps in making sure there are no problems with the hardware or the software.
If this doesn't address your problem, return here for more guidance.

Randy
24
TMC3in1 FAQ / Something isn't working, HELP!
« Last post by Beginner on July 14, 2017, 10:23:17 AM »
I am trying to install the TMC3in1 and associated hardware an software. I'm having problems. Please point me to a document that can help.
25
TMC3in1 FAQ / Re: How do I get started with the TMC3in1?
« Last post by RandyRay on July 14, 2017, 10:15:41 AM »
The quickest way to start setting up for using the TMC3in1 is readiing volume 01:

Hardware/Software Setup Guide

http://texasmicrocircuits.com/.Files/Documentation/PDFs/TMC3in1_Doc_Vol_01_Hardware_Software_Setup_Guide_4.2.x.x_A.pdf

All the latest manuals can be accessed from our main web page:

www.texasmicrocircuits.com

Randy
26
TMC3in1 FAQ / How do I get started with the TMC3in1?
« Last post by Beginner on July 14, 2017, 10:12:30 AM »
I need to  set up quickly. What manual do I start with?
27
TMC3in1 FAQ / Re: Where do I find the documentation for the TMC3in1?
« Last post by RandyRay on July 14, 2017, 10:07:56 AM »
Hi,
The documentation for the TMC3in1 (currently 4 manuals) is located at:

http://texasmicrocircuits.com/index.php/files/

It is also directly available via a link on our main web page:

www.texasmicrocircuits.com

Randy
28
TMC3in1 FAQ / Where do I find the documentation for the TMC3in1?
« Last post by Beginner on July 06, 2017, 12:00:33 PM »
Where do I find the documentation for the TMC3in1?
Pages: 1 2 [3]