Author Topic: Torch Up/Down LEDs flashing on Diag screen  (Read 129 times)

Beginner

  • Guest
Torch Up/Down LEDs flashing on Diag screen
« on: July 14, 2017, 10:52:44 AM »
Why are the Torch Up and Torch Down LEDs flashing in the screen set’s Diagnostics screen?

RandyRay

  • VERY Senior Engineer (i.e.old)
  • Administrator
  • Newbie
  • *****
  • Posts: 13
    • View Profile
    • Texas MicroCircuits
Re: Torch Up/Down LEDs flashing on Diag screen
« Reply #1 on: July 14, 2017, 10:54:00 AM »
The Torch Up and Torch down LEDs will flicker constantly when the TMC3in1 is alive and working.  These do not represent actual THC Up and Down commands, but rather the data controlling where the Z axis should go to. 

Please refer to the Vol 4 FAQ and Troubleshooting Guide under Q9 for a photo of the settings in question.
Randy Ray
Owner/Architect
Fire-by-Wire/TMC3in1
Texas MicroCircuits